621-6000-1-1-2-6

Pressure Transmitter

1/4 in NPT Male

12 oz

316 Stainless Steel

0.25%

4 mA to 20 mA, 2-wire

1/2" NPT Male Conduit with 6 ft Integral Cable

10 Vdc to 30 Vdc (4 mA to 20 mA, 2-wire)
6 Vdc to 30 Vdc (1 Vdc to 5 Vdc, 3-wire, 0.5 Vdc to 4.5 Vdc, 3-wire)
14 Vdc to 30 Vdc (0 Vdc to 10 Vdc, 3-wire)

0 to 6,000 psig

≤ ±0.2% full scale for 1 year, non-accumulating

≤1 ms

> 100,000,000 Load Cycles

32 to 176 ºF

0 to 80 ºC

621 Series is 316 Stainless Steel for ranges up through 0 psi to 300 psi, 316 Stainless Steel with Elgiloy ranges 0 psig to 500 psig and higher

316 Stainless Steel

Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection

Ingress Protection (IP67)

Reverse polarity, over-voltage and short circuit protected

1,000 g

20 g

NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

For example, you can simplify your system with this easy-to-install solution from NOSHOK. Three simple components that require a single threaded connection in your piping system will provide local indication, analog output and block/isolate with bleed function. This product grouping is an ideal solution for a variety of applications including oil and gas, and is available in several high pressure ranges, including 5,000, 10,000 and 15,000 psi. Special design for Shale Gas applications.

This example represents a general solution; however, we offer a diverse range of gauges, transmitters and valves which are available with a variety of connection options and ranges to suit your needs. (Photo shows 40-400 Series Pressure Gauge (Local Indication), 621 Series Pressure Transmitter (Control Output), and 200 Series Multi-Port Valve (Block/Isolate & Bleed).

NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.

32 to 176 ºF

0 to 80 ºC

-40 to 131 ºF

-40 to 55 ºC

-40 to 158 ºF

-40 to 70 ºC

-40 to 212 ºF

-40 to 100 ºC

-40 to 140 ºF

-40 to 60 ºC

-40 to 167 ºF

-40 to 75 ºC

-40 to 221 ºF

-40 to 105 ºC

0.02 A

≥ 10,000 O

NOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as follows:

• Explosion-proof with entity approved for: Class I, Division 1, Groups A, B, C and D.
• Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.
• Maximum electrical ratings 30V, 20 mA.
• ANSI/ISA-12.27.01, Approved single seal.